|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High IIP3 PIN Diode Variable Attenuator 1.70-2.00 GHz Features * * * * * RoHs and ELV compliant 1.4 dB Insertion Loss, Typical 1.4:1 VSWR, Typical 21 dB Attenuation, Typical 45 dBm IIP3, Typical (1 MHz Offset, @ + 0 dBm Pinc) * 0 - 1.66 Volts Control Voltage @ 1.50 mA Typical MA4VAT2004-1061T V2 PIN Configuration (Topview) Extra Features * Covers the following Bands: * DCS * PCS * UMTS/WCDMA/CDMA * TD-S_CDMA * SCDMA * Usable Bandwidth: 1.50 GHz to 2.50 GHz * 1.8 dB Insertion Loss, Typical * 2:1 VSWR, Typical * 18.5 dB Attenuation, Typical PIN Configuration (Topview) PIN 1 2 Function DC1 GND GND RFin/out RFout/in GND GND DC2 Symetrical as RF Input/Ouput Symetrical as RF Input/Ouput Comments Description and Applications M/A-COM's MA4VAT2004-1061T is a HMIC PIN Diode Variable Attenuator which utilizes an integrated 90 degree 3dB hybrid with a pair of Silicon PIN Diodes to perform the required attenuation function as D.C. Voltage (Current) is applied. This device operates from 0 to 1.66 Volts at 1.50mA typical control current for maximum attenuation. The user can add external biasing resistors to the bias ports for higher voltage requirements as required. M/A-COM's MA4VAT2004-1061T PIN Diode Variable Attenuator is designed for AGC Circuit Applications requiring: * Lower Insertion Loss * Lower distortion through attenuation * Large dynamic range for wide spread spectrum applications 3 4 5 6 7 8 Absolute Maximum Ratings1,2 @ T = +25 C Parameter Operating Temperature Storage Temperature Junction Temperature RF C.W. Incident Power Reversed Current @ -30 V Control Current Maximum Ratings -40 C to +85 C -65 C to +150 C +175 C +33 dBm C.W. l -50nA l 50mA per Diode 1. All the above are at Room Temperature except as noted 2. Exceeding the above Limits may cause permanent damage 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High IIP3 PIN Diode Variable Attenuator 1.70-2.00 GHz Electrical Specifications @ +25 C Parameter No DC Bias Low Loss State Insertion Loss Input Return Loss Output Return Loss P1dB IIP3 Control Voltage DC Bias RF Attenuation State Maximum Attenuation Input Return Loss @ Max Attenuation Output Return Loss @ Max Attenuation IP3 Control Voltage @ Max Attenuation 1.70 GHz - 2.00 GHz dB dB dB dBm V 20 18 18 36 1.70 GHz - 2.00 GHz dB dB dB dBm dBm V 13 13 30 47 - MA4VAT2004-1061T V2 Frequency Band Unit Min Typ 1.4 15 15 49 0V @ 0uA Max 1.8 - 24 21 21 39 1.66V @ 1.50mA - Typical RF Performance Over Industry Designated RF Frequency Bands Band Freq (MHz) DCS RX TX 1710-1785 1805-1880 I. Loss (dB) 1.6 1.6 Att. (dB) 22 22 R. Loss (dB) 13 13 IIP3 (dBm) 50 50 Phase -Relative- (Degree) +15 PCS RX TX 1850-1910 1930-1990 1.6 1.6 21 21 13 13 50 50 +10 UMTS WCDMA/CDMA RX TX 1920-1980 2110-2170 1.6 1.8 20 20 13 13 50 50 -5 TD-S-CDMA - 2010-2025 1.7 20 13 50 -2 SCDMA - 1800-2200 1.8 20 13 50 -10 1. All are typical values only. 2. Relative phase is the measured Insertion Phase Difference between Insertion Loss and the 20dB Attenuation State. (Please refer to the plots below) 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High IIP3 PIN Diode Variable Attenuator 1.70-2.00 GHz Plots of Typical RF Characteristics @ + 25 C Typical Insertion Loss & Attenuation Plot Typical Insertion Loss & Attenuation for MA4VAT2004-1061 0 -5 25 20 MA4VAT2004-1061T V2 Typical Attenuation Vs Voltage Plot Typical Attenuation vs Voltage for MA4VAT2004-1061 Attenuation (dB) Attenuation (dB) 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 -10 -15 -20 -25 15 10 5 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 Frequency (GHz) 0V/0mA 0.94V/0.49mA 1.26V/0.93mA 1.50V/1.22mA 1.66V/1.50mA Voltage Applied (V) Typical Return Loss @ All Attenuation Levels Plot Typical Return Loss at Attenuation levels for MA4VAT2004-1277 0 Typical IIP3 Vs Attenuation Plot Typical IP3 vs Attenuation for MA4VAT2004-1061 60 50 Input Return Loss (dB) -5 -10 -15 -20 IP3 (dBm) 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 40 30 20 10 -25 0 0 3 6 1700MHz 9 Frequency (GHz) 0V/0mA 0.94V\0.49mA 1.26V/0.93mA 1.50V/1.22mA 1.66V/1.50mA Attenuation (dB) 1850MHz 12 15 18 2000MHz 21 24 Typical Relative Phase Shift Per Attenuation (Voltage) Plot Typical Relative Phase Shift vs Frequency per Attenuation for MA4VAT2004-1061 25 20 15 10 5 0 -5 -10 -15 -20 -25 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Relative Phase (degree) For Reference ONLY: * Low Loss * 5 dB Attenuation * 10 dB Attenuation * 15 dB Attenuation * 20 dB Attenuation = = = = = 0.00V, @0.00mA 0.94V, @0.49mA 1.26V, @0.93mA 1.50V, @1.22mA 1.66V, @1.50mA Frequency (GHz) 0V/0mA 0.94V/0.49" 1.26V/0.93mA 1.50V/1.22mA 1.66V/1.50mA 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High IIP3 PIN Diode Variable Attenuator 1.70-2.00 GHz Package Pin Designation, External Components, and Equivalent Circuit MA4VAT2004-1061T V2 Cbias Lbias Control Current Rbias RF IN/OUT Cblock Lbias Cbias Cblock RF OUT/IN External Bias Components Rbias= 680 Ohms ( 1.66 V, 1.50 mA ) Lbias= 150 nH Cbias =100 pF Cblock =100 pF Ordering Information Part Number MA4VAT2004-1061T Package Tape and Reel 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MA4VAT2004-1061T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |